Description
Cargo Floor 5mm Aluminium Anti-Wear Protection Strip for 156.8mm Profile – 7371066
The Cargo Floor 7371066 Aluminium Anti-Wear Protection Strip is a genuine wear-protection component designed for compatible 156.8mm / 6.17" Cargo Floor moving floor profiles.
Manufactured from 5mm aluminium, this version is supplied without pre-drilled welding holes, allowing it to be installed according to the applicable Cargo Floor floor-profile repair or fabrication requirements.
Designed for 156.8mm Floor Profiles
Cargo Floor officially lists part 7371066 as:
Aluminium Anti-Wear Protection Strip 5mm – Excluding Holes for Welding – 156.8mm
The strip is specifically intended for the applicable standard 156.8mm floor-profile configuration.
It should not be confused with 7371067, which Cargo Floor lists separately for the 156.8mm HD profile.
5mm Aluminium Construction
The 7371066 is manufactured from 5mm-thick aluminium and provides an additional wear surface at the applicable area of the moving floor profile.
The strip is designed to take wear that would otherwise affect the main aluminium floor profile, providing a replaceable protection component during maintenance and refurbishment.
Supplied Without Welding Holes
An important feature of 7371066 is that it is supplied:
Without holes for welding
This distinguishes it from 7371060, the 5mm aluminium anti-wear strip for 112mm profiles that Cargo Floor supplies with welding holes.
Any preparation required for installation should follow the appropriate Cargo Floor repair or welding procedure.
Product Details
- Cargo Floor Part Number: 7371066
- Product: Aluminium Anti-Wear Protection Strip
- Material: Aluminium
- Thickness: 5mm
- Profile Width: 156.8mm / 6.17"
- Welding Holes: Not Included
- Application: Cargo Floor Moving Floor Profile
- Version: Standard 156.8mm
- Component Type: Floor Profile Wear Protection
- Manufacturer: Cargo Floor B.V.
- Replacement Part: Genuine Cargo Floor component
Standard vs HD 156.8mm Strip
Cargo Floor lists two separate 5mm anti-wear strips for 156.8mm floor profiles:
- 7371066 – 5mm aluminium anti-wear protection strip, 156.8mm standard, without welding holes
- 7371067 – 5mm aluminium anti-wear protection strip, 156.8mm HD, without welding holes
Although both are designed for 156.8mm profiles and are 5mm thick, the standard and HD versions have separate Cargo Floor part numbers and should not automatically be treated as interchangeable.
Related Anti-Wear Components
Cargo Floor also lists:
- 7371059 – Shaped stainless steel anti-wear profile for bottom side of 112mm aluminium profile and end cap
- 7371060 – 5mm aluminium anti-wear protection strip with welding holes for 112mm profile
- 7371065 – Stainless steel protection and anti-wear profile for 156.8mm end cap
- 7371066 – 5mm aluminium anti-wear strip for standard 156.8mm profile
- 7371067 – 5mm aluminium anti-wear strip for 156.8mm HD profile
Selecting the correct component according to floor-profile type is important.
When to Replace the Anti-Wear Strip
Inspect the protection strip as part of routine moving floor maintenance and replace it where there is:
- Excessive material loss
- Deep scoring or grooves
- Cracking
- Distortion
- Impact damage
- Separation from the floor profile
- Damaged welded areas
- Wear approaching the underlying floor profile
Replacing a worn protection strip before the underlying aluminium floor profile becomes damaged can help minimise more extensive repairs.
Compatibility
Before ordering Cargo Floor 7371066, confirm:
- Existing floor uses the applicable 156.8mm / 6.17" profile
- Standard rather than HD version is required
- A 5mm aluminium anti-wear strip is required
- Version without welding holes is required
- Existing component corresponds with 7371066
- Underlying floor profile remains suitable for repair
Do not substitute 7371067 solely because it is also designed around a 156.8mm profile; Cargo Floor specifically identifies that part as the HD version.
Installation
Installation involves work on the aluminium moving floor profile and should be carried out using the appropriate Cargo Floor repair procedure.
Before installation:
- Safely isolate the moving floor system.
- Remove the worn protection strip where applicable.
- Clean the installation area thoroughly.
- Inspect the underlying aluminium profile.
- Check for cracks, distortion or excessive wear.
- Position the replacement strip correctly.
- Prepare any required welding points according to the applicable repair procedure.
- Use appropriate aluminium welding techniques.
- Avoid excessive heat input and distortion.
- Inspect the completed installation.
- Check for interference with adjacent moving floor components.
- Test floor operation before returning the trailer to service.
Aluminium welding should be carried out by a suitably competent person using appropriate equipment and procedures.
Cargo Floor Technical Information & Videos
Cargo Floor provides official parts information, technical documentation and videos covering its moving floor profiles and wear-protection components.
Cargo Floor official video library:
https://www.cargofloor.com/en/video
Cargo Floor moving floor information:
https://www.cargofloor.com/en/moving-floor
Cargo Floor parts catalogue:
https://www.cargofloor.com/en/parts-catalog
Cargo Floor technical downloads:
https://www.cargofloor.com/en/downloads
Official Cargo Floor website:
https://www.cargofloor.com/en


![Cargo Floor Plastic Bearing Strip 7/112 [4.41"] Height 32 mm. [1.26"] (White)](https://sjctrailers.co.uk/wp-content/uploads/2026/08/4103010-300x300.webp)
![Cargo Floor Plastic Wear Plate For Rear Portal Trailer, Dim. 2.500x250x5mm [98"x10"x0.2"]](https://sjctrailers.co.uk/wp-content/uploads/2026/08/4101007-300x300.webp)

![Cargo Floor Cargo Twister WIDE 40/25 [1.6/1"]](https://sjctrailers.co.uk/wp-content/uploads/2026/08/4107031-300x300.webp)

Reviews
There are no reviews yet.