Call us on (+44) 01366 691523 | Email info@sjctrailers.co.uk
£0.00

Cargo Floor 6.5mm Choke for Control Valve 02 – 7370107

Genuine Cargo Floor fixed hydraulic choke with a Ø6.5mm orifice, designed for compatible Control Valve 02 moving floor systems.

Part Number: 7370107
Product: Fixed Hydraulic Choke
Choke Diameter: Ø6.5mm
Control Valve: 02
Typical Oil Flow: Approx. 60–110 L/min
Manufacturer: Cargo Floor

SKU: 7370107 Category: Brand:

Description

Cargo Floor 6.5mm Choke for Control Valve 02 – 7370107

The Cargo Floor 7370107 Choke is a genuine hydraulic flow-control component with a 6.5mm diameter orifice, designed for compatible Cargo Floor moving floor systems fitted with Control Valve 02.

The fixed choke is installed within the hydraulic control-valve arrangement to provide the specified restriction required for correct operation of the system.

Fixed Ø6.5mm Choke

Part 7370107 has a specified choke diameter of:

Ø6.5mm

Unlike the variable 7370106 choke, the 7370107 uses a fixed-size orifice and is intended for hydraulic systems operating within the appropriate oil-flow range.

Designed for Control Valve 02

Cargo Floor specifies the Ø6.5mm choke for its Control Valve 02 hydraulic arrangement.

The choke is installed in the applicable control-valve passage and provides a controlled restriction to hydraulic oil flow, supporting correct operation of the valve's switching and control functions.

Product Details

  • Cargo Floor Part Number: 7370107
  • Product: Hydraulic Choke
  • Choke Diameter: Ø6.5mm
  • Type: Fixed Choke
  • Control Valve: 02
  • Application: Hydraulic Oil Flow Control
  • System: Compatible Cargo Floor Moving Floor Systems
  • Component Type: Hydraulic Control Valve Component
  • Manufacturer: Cargo Floor B.V.
  • Replacement Part: Genuine Cargo Floor component

Hydraulic Flow Application

Cargo Floor technical information associates the standard 6.5mm choke with an oil flow of approximately 60–110 litres per minute (16–29 US gpm).

Correct choke selection is important because the hydraulic control system relies on an appropriate oil-flow characteristic to operate correctly.

Too little or too much hydraulic flow can affect system operation and should be diagnosed rather than compensated for by fitting an unsuitable choke.

Fixed vs Variable Choke

Cargo Floor provides different choke options for Control Valve 02:

  • 7370107 – Fixed Ø6.5mm choke
  • 7370106 – Variable / flow-independent choke

The 7370106 variable choke is specified for a wider flow range of approximately 20–120 L/min, making it useful where the trailer may operate from hydraulic systems with significantly differing pump outputs.

The 7370107 should therefore be selected where the standard fixed Ø6.5mm specification is appropriate.

When to Inspect or Replace

The choke may warrant inspection during control-valve servicing or when investigating hydraulic flow or switching problems.

Check for:

  • Blockage or contamination
  • Physical damage
  • Incorrect choke size
  • Debris within the orifice
  • Damage to the surrounding valve components
  • Hydraulic oil contamination
  • Previous non-standard modifications

The 6.5mm orifice should not be drilled, enlarged or otherwise modified to compensate for another hydraulic problem.

Compatibility

Before ordering Cargo Floor 7370107, confirm:

  • Control Valve 02 is fitted
  • Fixed Ø6.5mm choke is required
  • Existing hydraulic oil-flow specification
  • Existing choke/component part number
  • Current Cargo Floor system configuration

Do not automatically substitute the variable 7370106 or another fixed choke without establishing the hydraulic requirements of the system.

Installation & Hydraulic Safety

The hydraulic system must be fully depressurised and safely isolated before opening the control valve or removing the choke.

During installation:

  • Keep the choke and valve components completely clean.
  • Prevent contamination entering the hydraulic circuit.
  • Inspect the choke passage for debris.
  • Confirm the correct Ø6.5mm component is being installed.
  • Check associated plugs and seals.
  • Reassemble according to the applicable Cargo Floor procedure.
  • Check the valve for hydraulic leakage.
  • Test both loading and unloading operation.
  • Confirm correct moving floor sequencing.

If hydraulic flow or pressure remains outside specification after replacement, investigate the complete hydraulic supply and control system rather than modifying the choke.

Cargo Floor Technical Information & Videos

Cargo Floor provides official information and technical videos covering Control Valve 02, hydraulic flow, control systems, servicing and troubleshooting.

Cargo Floor official video library:
https://www.cargofloor.com/en/video

Cargo Floor moving floor controls:
https://www.cargofloor.com/en/moving-floor/control

Cargo Floor parts catalogue:
https://www.cargofloor.com/en/parts-catalog

Cargo Floor technical downloads:
https://www.cargofloor.com/en/downloads

Official Cargo Floor website:
https://www.cargofloor.com/en

Reviews

There are no reviews yet.

Be the first to review “Cargo Floor 6.5mm Choke for Control Valve 02 – 7370107”

Your email address will not be published. Required fields are marked *

Office Address
65 London Road
Downham Market
Norfolk
PE38 9AT
Parts Warehouse
6A New Road
Crimplesham
King's Lynn
Norfolk
PE33 9FH
SJC Trailers Ltd
Registered in England & Wales
Company No 07312468
View Catalogue
linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram