Description
Cargo Floor Aluminium Cylinder Head No. 1 / 2 with Seals & Valve – 7371010
The Cargo Floor 7371010 Cylinder Head is a genuine aluminium replacement cylinder head designed for Cylinder No. 1 and Cylinder No. 2 in compatible Cargo Floor hydraulic moving floor drive systems.
Supplied including seals and valve, it provides a convenient replacement assembly when servicing or rebuilding the applicable hydraulic cylinder.
For Cylinder No. 1 & No. 2
Cargo Floor specifies part 7371010 as:
Cylinder Head No. 1 / 2 (Aluminium) Including Seals and Valve
The same cylinder head is therefore used for the applicable No. 1 and No. 2 hydraulic cylinders.
Cylinder No. 3 uses a different cylinder head – 7371021 – and should not be assumed to be interchangeable.
Aluminium Construction
The cylinder head is manufactured from aluminium and forms part of the hydraulic cylinder assembly.
Correct condition of the cylinder head, seals and internal valve components is important for maintaining reliable hydraulic operation and correct cylinder sequencing.
Seals & Valve Included
The 7371010 is supplied as an assembly including:
- Aluminium cylinder head
- Applicable seals
- Cylinder valve
This makes it particularly useful when repairing a cylinder where the existing cylinder head, sealing components or valve assembly are worn or damaged.
Product Details
- Cargo Floor Part Number: 7371010
- Product: Hydraulic Cylinder Head
- Cylinder Positions: No. 1 / No. 2
- Material: Aluminium
- Seals: Included
- Valve: Included
- Application: Cargo Floor Hydraulic Cylinder
- Component Type: Cylinder Repair / Revision Part
- Manufacturer: Cargo Floor B.V.
- Replacement Part: Genuine Cargo Floor component
Cylinder Revision Component
Cargo Floor lists 7371010 within its cylinder revision parts alongside components including:
- 7071004 – Sequence Cylinder Valve
- 7071005 – Standard Spring for Cylinder Check Valve, L=45mm
- 7071010 – Full Thread Cylinder Valve Seat
- 7371010 – Cylinder Head No. 1 / 2 including seals and valve
- 7371021 – Cylinder Head No. 3 including seals
- 7376008 – Seal Set for One Cylinder
- 70173/4.1 – 3/4" Hollow Plug for Valve Spring
- 70183/4.1 – 3/4" Machined Bonded Seal
Inspecting these related components can be worthwhile when overhauling a hydraulic cylinder.
No. 1 / 2 vs No. 3 Cylinder Head
It is important to select the correct cylinder head:
7371010 – Cylinder Head No. 1 / 2
- Aluminium
- For Cylinder No. 1 or No. 2
- Seals included
- Valve included
7371021 – Cylinder Head No. 3
- Aluminium
- Specifically for Cylinder No. 3
- Seals included
The No. 3 cylinder head should not automatically be substituted for the No. 1 / 2 version.
When to Replace the Cylinder Head
Replacement may be required where inspection identifies:
- Hydraulic oil leakage around the cylinder head
- Damaged sealing surfaces
- Worn or damaged seals
- Valve-related problems
- Physical damage to the cylinder head
- Excessive corrosion or contamination
- Damage discovered during cylinder overhaul
Hydraulic cylinder problems should be properly diagnosed before replacement, as faults elsewhere in the drive or control system can produce similar symptoms.
Compatibility
Cargo Floor lists 7371010 as a cylinder revision component and identifies it in its CF500 cylinder documentation for the No. 1 and No. 2 cylinder positions.
Before ordering, confirm:
- Existing cylinder uses 7371010
- Cylinder being repaired is the applicable No. 1 or No. 2
- Existing Cargo Floor drive-system configuration
- Condition of the cylinder body and piston rod
- Associated valve and sealing components
Do not select a cylinder head solely from its physical appearance.
Installation & Hydraulic Safety
The hydraulic system must be fully depressurised and safely isolated before dismantling a hydraulic cylinder.
During overhaul:
- Work in a clean environment.
- Prevent contamination entering the hydraulic components.
- Inspect the cylinder bore and piston rod for damage.
- Inspect mating and sealing surfaces.
- Lubricate and install seals according to the applicable service procedure.
- Confirm correct valve assembly and orientation.
- Use the correct tightening procedures.
- Reassemble the cylinder carefully.
- Check for hydraulic leakage after installation.
- Test cylinder movement and complete system sequencing before returning the equipment to service.
Cargo Floor Technical Information & Videos
Cargo Floor provides official exploded views, parts information, technical documentation and videos covering its hydraulic moving floor systems.
Cargo Floor official video library:
https://www.cargofloor.com/en/video
Cargo Floor moving floor information:
https://www.cargofloor.com/en/moving-floor
Cargo Floor parts catalogue:
https://www.cargofloor.com/en/parts-catalog
Cargo Floor technical downloads:
https://www.cargofloor.com/en/downloads
Official Cargo Floor website:
https://www.cargofloor.com/en



![Cargo Floor Plastic Bearing Block 60x60x32 [2.36x2.36x1.26"], For Pipe Ø=25 mm [1"] Box 14 Pieces](https://sjctrailers.co.uk/wp-content/uploads/2026/03/cargo-floor-plastic-conduction-block-for-25mm-pipe-4105009.1-1-300x300.jpg)




Reviews
There are no reviews yet.